How to use an inflatable tent

Jun 08, 2024

Leave a message

Overview

The inflatable tent adopts a structural frame form (inflatable), the inflatable air column adopts high-strength polyester mesh cloth (PVC airtight cloth for short), the awning adopts 600D rainproof and flame-retardant Oxford cloth, and the base fabric adopts PVC scraper cloth. This material has the characteristics of high tensile strength, high rigidity, good air tightness, light weight, low wind resistance, waterproof, heat insulation, cold resistance, good sound insulation, simple installation and disassembly, convenient to carry, beautiful appearance design, and comfortable life. It is widely used in camping, field construction, fire fighting, disaster relief, rescue, tourism, games and other environments. Other forms of similar products are incomparable and are deeply welcomed and praised by users.

 

Device

(1) Preparation before installation

1. Site requirements: The site is relatively flat, and no sharp objects are allowed to touch the ground and the surrounding area, nor are sharp objects allowed to be dragged on the ground, so as not to damage the awning and frame and affect the service life and appearance of the inflatable tent.

2. Check whether the parts of the entire device are damaged and whether all accessories can be used normally.
3. Prepare installation tools, such as an oil filling pump, etc.

(2) Installation

1. Lay the frame and base fabric flat on the ground and inflate the inflatable frame.
During the inflation process, it is best to inflate both inflation valves at the same time to ensure the synchronous expansion of all parts. Each air column is not allowed to eliminate knots and twists. If the air flow of the air column is poor, it can be tapped a few times. When the air column is erected, several people can help it stretch and lift the tent so that the air column can be erected quickly.

2. When inflating for the first time, the air pressure shall not exceed 13.3kpa. After each air column is fully inflated after inflation, the air is replenished and the pressure is increased after 5 minutes, but the maximum pressure shall not exceed 20KPa. The inflation pressure can be appropriately increased or decreased according to the ambient temperature to prevent the air bag from bursting.
It is recommended to use an imported pump or a foot pump to directly inflate and pressurize large and small tents at one time.

3. When the air column is in place at the designated position, multiple people should fix it in place at the same time during transportation. Dragging and sliding on the ground are strictly prohibited.

4. Install the tarpaulin and pull it gently.
It is strictly forbidden to pull it out forcefully. All fasteners, zippers and other accessories should be firmly connected.

5. The installation of the ground anchor plays a real tightening and fixing role in the insertion depth of the ground. The ground soil layer where the ground anchor is inserted must be compacted.

6. Check whether all devices are firm and ensure that the geometric tolerance is 0.5%.

 

Use

(1) When using the Keqi smart inflatable tent, you must first do a good job of fire prevention and always pay attention to fire prevention (although all fabrics of the Keqi smart inflatable tent are flame retardant, they are not flame retardant).

(2) It is strictly forbidden for sharp edges and sharp hard objects to touch the awning.

(3) Each lock, zipper, door curtain, and curtain should be opened gently. It is strictly forbidden to pull it forcefully.

(4) Use environment: temperature is -30℃-50℃.

(5) The air column of the tent shall not carry other items exceeding 10kg, and heavy objects (over 5kg) are not allowed to be hung.

(6) It is strictly forbidden to contact acidic substances such as benzene, ketone and other organic solvents.

(7) During the use of the tent, a special person should be assigned to conduct regular inspections and maintenance, and any problems should be dealt with in a timely manner.

(8) When retracting the tent, open the doors and windows, exhaust the air in the air column, and then fold the tent.

 

Maintenance

(1) When cleaning, it is recommended to use a neutral detergent, and it is strictly forbidden to use organic solvents such as benzene and ketone.

(2) Regularly check the air tightness of each air column and the firmness of each accessory.

(3) If there are any damaged parts, please repair them according to the following process:

1. Treat each joint surface first, and then use acetone, butanone, tetrahydrofuran, etc. for surface treatment.

2. Use the WH-01 adhesive provided by our company to brush the pre-bonded surface. The brushing should be even and the thickness should be appropriate. Only after brushing twice can it be bonded.

3. The shape of the bonding interface must be designed to be circular or elliptical, and try to avoid the shape of square and sharp-angle interfaces. The overlap width should not be less than 30mm.

4. After the solvent in the adhesive evaporates, the adhesive can be bonded, and the patch should be flat and wrinkle-free. Rolling and scraping should be carried out. At the same time, a hair dryer should be used to provide a heat source to facilitate bonding. After 6 hours of bonding, it can be inflated and put into use.

5. Storage and transportation

After the tent is used, the following work should be done: After the tent is used, first check whether there are leftovers in the tent. If there are leftovers, clean them up.

(1) During the disassembly process, all parts should be pulled gently instead of force. After disassembly, all tarpaulins should be folded flat, but not folded. All accessories should be placed in the designated packaging and sealed.

(2) Storage environment requirements: Store in a cool, dry, well-ventilated warehouse. Exposure to sunlight is strictly prohibited. The storage temperature is -35℃-50℃.

(3) During transportation, it is strictly forbidden to lift and slide the awning on the ground. It requires multiple people to lift or a vehicle to transport.

(4) Heavy objects are not allowed to be placed on the packaging box

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!