The frame structure of military tents is different from that of disaster relief tents. Therefore, when setting up a tent, you should first read the instruction manual of the tent. The frame of a disaster relief tent generally uses tees, crosses and other through-holes and straight pipes for connection.
Steps to build a military tent:
1. Open the tent body packaging bag and the frame packaging bag, take out the product packaging list and count the number of each component;
2. Take out 8 universal poles and three sets of end frame tees and middle frame crosses with pressed and fixed wire ropes, arrange them into three groups of herringbone shapes and connect them;
3. Take 4 universal poles and the end frame tees and middle frame crosses to form a frame;
4. Put the whole cotton liner on the three groups of herringbone frames, adjust the position so that the cotton liner tent top is aligned with the middle pole of the herringbone frame;
5. Put the outer tent top cover on the outside of the three groups of herringbone frame cotton liner, and adjust the position;
6. Take 6 vertical poles and insert them into the end frame tees and middle frame crosses respectively, and use 6 people to prop up the tent top at the same time , connected with the pole head rod that has been placed;
7. Use nylon Velcro to glue the side wall of the cotton liner to the gable of the cotton liner, and adjust the position;
8. Pass the binding belts of each upright pole of the single tent through the copper tent ring of the cotton liner and tie them to each upright pole;
9. Tighten the binding belts of each part, buckle the nylon zipper, adjust the position of the tent, and connect it with each pole of the frame;
10. Glue the side wall and gable of the liner of the ground tent with nylon Velcro;
11. Drive triangular piles at the corresponding position on the ground, fix the pull rope, adjust the tightness, and put the rubber-plastic pile head on the end face of the triangular pile;
12. Arrange the tent and bury it with soil around the tent.
