When the natural disaster came, although we could not resist, we could defeat the disaster through fearless actions. During the operation, the disaster relief tent was an important material and provided many convenient conditions for the people in the disaster area. However, many disasters will be accompanied by wind and rain. If the disaster relief tent is moist, it will be affected whether it is residential or storage of disaster relief materials. How to do a good job of moisture -proof?
1. Avoid camping in a low -lying place
Water flowing down is a natural phenomenon, so in the absence of natural disasters, in order to avoid building a good sanitary emergency inflatable tent, we should not choose to build a tent in a relatively low -lying place to avoid being located in high places in high places The water remains so that the area of the camp is too much water.
2. Do not welcome the wind at the tent door
Many natural disasters are stormy and rainy. In this case, build a sanitary emergency inflatable tent In order to make the tent not inlet and maintain a good drying state, it must be built with the wind. It will not blow the tent. When it rains, it can also avoid rainwater from being scraped into the tent. At the same time, it can also avoid humid air blowing into the wind into the tent.
3. Dig a drainage ditch around
If you want to keep the sanitary emergency inflatable tent dry, you should still discharge the water on the camp floor as soon as possible. Therefore, after the tent is built, a width and flowing drainage ditch should be dug around. The water flowing down can be quickly discharged by the stagnant water generated by rain, so as not to cause tents to be vulnerable to moisture due to excessive water on the ground.
