1. Guidelines
(1) Maintenance and maintenance work should implement the principle of prevention first. Failures should be nipped in the bud. Operators should be supervised to use them correctly in accordance with the provisions of the use and maintenance instructions to prevent accidents and extend service life and Maintenance cycle to ensure the safe operation of the module.
(2) Earnestly implement the principle of combining use and maintenance and who uses it and who maintains it.
(3) Adhere to the principle of combining use and maintenance. Operators should use and maintain the machine during daily work. protect. Training is required before use.
(4) Daily maintenance and regular maintenance (repair) systems must be strictly implemented. Routine maintenance: The operator should perform maintenance as usual, including inspection before work; pay attention to check whether the module is operating normally during work; check for cleaning and maintenance after withdrawal, and eliminate hidden dangers in time if found. Regular maintenance: as required in the use and maintenance instructions. Perform regular maintenance and upkeep.
Adhere to the principles of reasonable planning and scientific maintenance. The focus of maintenance work is to improve the quality of maintenance work, reduce downtime, and improve operation rate. To achieve this, we must implement reasonable planning, preventive planned maintenance, and pay attention to the adoption of scientific maintenance methods to maximize efficiency.
2. Precautions
Sufficient preparations should be made before performing maintenance, including preparation of environmental conditions. It should be carried out under appropriate temperature and humidity conditions. The site should be level and the required maintenance tools and spare parts should be fully prepared; maintenance and repair items It should be carried out by specialized personnel and strictly follow the operating procedures; during the maintenance process, the original conditions should be registered and recorded.
Specific precautions are as follows:
(1) When using, you should strictly follow the operation and maintenance instructions, and carefully read the precautions in the operation and maintenance instructions.
(2) It is prohibited to expand or retract under wind conditions of level 6 or above; it is prohibited to use it under wind conditions of level 10 or above.
(3) It is forbidden for sharp blades and sharp hard objects to come into contact with the canopy body.
(4) It is strictly prohibited to come into contact with acidic items, such as benzene, ketones and other organic solvents.
(5) Gently open each hook, zipper, door curtain, and curtain. It is strictly forbidden to pull or pull.
(6) During use, there should be personnel to conduct inspections and maintenance, and deal with problems in a timely manner if problems are found.
(7) Always pay attention to fire prevention when using.
(8) When dismantling the tent, dust and debris on the surface should be removed first. If the tent is wet, it must be wiped dry before folded and stored.
(9) When dismantling the tent, try to drain the air inside the tent before folding it.
(10) Regularly take out the tent to dry, rearrange it and store it again.
3. Daily maintenance
See Table 1 for daily maintenance items.
4. Regular maintenance
The regular maintenance items are shown in Table 2.
5.Cleaning
(1) During the use of the tent, if there are small stains on the inner tent, wipe it clean with a rag in time to avoid stubborn stains that will affect the cleaning effect over time. The ground cloth can be cleaned daily with a broom, dustpan, mop, etc.
(2) Before removal, clean and dry the outer tent as a whole before packing and storing the tent.
6.Storage
(1) The interior and exterior surfaces of the tent and all equipment should be thoroughly wiped clean and ventilated and dried.
(2) Check the accompanying documents and accessories, and securely package all supporting equipment, tools, etc.
(3) The warehouse should be clean, dry and well ventilated.
(4) It is strictly prohibited to place flammable materials, acids, alkalis and other chemicals in the warehouse.
(5) The whole box should be stored in a warehouse that is rain-proof, sun-proof, moisture-proof and equipped with fire-fighting facilities.
(6) A passage of more than 1m must be left between it and other items.
