fast set up inflatable tent by electric pump

fast set up inflatable tent by electric pump

Details
Category
Low Pressure Inflatable Tent
 
Send Inquiry
Description
Technical Parameters

 

Products Description

 

Shower low pressure Inflatable tent -  fast set up inflatable tent by electric pump


The Inflatable Tent set up by auto Electric Pump makes it easy to inflate your tent in minutes without any physical effort . it is not only saves time and energy, but it also ensures that your tent is inflated to the perfect level of firmness, providing maximum stability and comfort throughout the use of the inflatable tent.

Inflatable tent set up video

 

 

Inflatable tent Parmeter

Technical Parameters

Outer tent fabric

600D*600D Oxford cloth ,high-strength polyester with PVC coating

Color :

Thickness: 0.55mm ± 0.5mm

Tensile strength:warp 1700N / 5cm ;weft 1200N / 5cm

Tearstrength:warp 270N / 5cm ;weft 213N / 5cm

Waterproof strength:> 3000mm

Flame retardant grade: B2

Frame column material

PVC composite airtight coated fabric

Color :

Thickness:0.75mm

Tensile strength:warp 3517N / 5cm ;weft 3508N / 5cm

Tearstrength:warp 510 N / 5cm ;weft 521 N / 5cm

Peel strength:warp 124 N / 5cm ;weft 129N / 5cm

Water seepage resistance:max 37kpa

Cold resistance:-50 ℃ +- 1 ℃ allowed crack max 1mm

Flame retardant grade: B2

Ground sheet

0.45mm thickness high strength polyester silk PVC coated fabric

Inner tent fabric

210D environmental protection Oxford cloth

Rope

φ6mm military green polyester core-wrap rope, the ground anchor tensioning adopts to adjust

Ground nail

Threaded steel nail, φ8mm * 500mm long

Processing methods

The air column is formed by high-frequency heat welding;

The tarpaulin adopts double needle sewing;

The seam is over waterproof tape.

Wind resistance

Max instant wind 80km/hr

Applicable temperature

-20 ℃ ~ + 60 ℃

Snow load

25cm thickness

Inflation time

5-8min

Deflation time

10-15min

Anti-surface water

245mm

Standard Accessories

high-pressure electric pump:1 set

quick mouthpiece:1 set

fixed nails:

high strength wind resistant ropes:

hammer: 1 set

Engineer Shovels: 2sets

Repair kit (glue, airtight coated cloth): 2 sets

package bag :1 pcs

Instructions: 1

Warranty

1 year (Storage period 5 years )

 

 

How to use the inflatable tent

1 Check before inflation:

Before deployment, the ground should be carefully inspected and cleared of items that may break the ground cloth and airbags. The site must be clean and tidy.

2 Unfold the tent:

Open the tent bag, unfold the tent, dibla level, move the tent to the location to be used, and predict the location of the ground fiber in advance.

3 Inflatable tent:

Open the inlet and outlet valve cover, and then insert the air pipe connector at the inlet and outlet valve to inflate, the inflation pressure should not exceed the rated pressure of 25kpa, the safety valve is opened to 27kpa (depending on the size of the tent, it needs to be installed) , Press the spool to open, pull out the inflatable connector, and quickly cover the valve cover.

4 Tent recovery: (electric recovery method)

When the tent is retracted, the inlet and outlet valve cover is opened and the valve core is pressed to release the gas. Then, the air pipe head is tightened, and then the interface is locked on the suction fan port, and the fan is driven to pump out the residual gas and tighten all the covers. After scrubbing the dirty place with clean water to dry, Z-fold from the left and right sides to the middle, then roll from the two ends to the middle, and put it in the packaging bag.

5 Tent storage:

5.1 Do not apply pressure for a long time with heavy objects

5.2 Temperature: -20 ℃ ~ + 40 ℃

5.3 Humidity: below 60%

5.4 Store in closed light.

6 Temporary maintenance:

First, wipe the damaged area to dry, cut a piece of air-tight cloth with a circumference greater than 3cm, apply a thin layer of glue evenly, and dry it for about 5 minutes to paste and compact it. It can be used after 20 minutes.

7 Special attention:

● Be sure to read all the instructions before operation

● No overpressure inflation

● Do not contact with sharp and hard objects to avoid scratching the airbag.

● Do not approach objects and open flames with a temperature above 60 ° C.

● Summer gas will expand. The inflation pressure should not be too high when the temperature is high. Check the air pressure at any time. When the pressure is too high, the gas should be properly deflated. (Check the safety valve frequently, whether it is normal to open and close.)

● Do not immerse in water above 30 ℃ for a long time.

● Do not use power equipment to force

Hot Products

 

Inflatable Tent A Frame        Inflatable Tents        Inflatable Tents

 

Packaging and Shipping

202503031228082025030312282520250303122855

PVC bag or wooden box packaging.Support sea transportation, land transportation and air transportation.

Welcome to contact us, our email is jinsail@jinsail.com, we will reply to you as soon as possible.

 

 

 

 

Hot Tags: fast set up inflatable tent by electric pump, China fast set up inflatable tent by electric pump manufacturers, suppliers, factory, recycled material tent, nature tent, corporate event tent, group activity in tent, horse saddle tent, manual inflation tent

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!