Products Description
The Customizable Disaster Relief Tent is a flexible shelter for disaster relief, emergency response and humanitarian aid.
These tents offer a roomy and safe space for many uses. They can serve as temporary housing, medical treatment areas, storage, or command centres. It's a vital tool for disaster response teams, humanitarian groups, and emergency services. Its big size, strength, and flexibility make it great for shelter and support in tough situations.
The Customizable Disaster Relief Tent is a rectangular double-slope straight-wall architectural style.And ropes connected to a triangular pile fixes the whole tent. Can according need to do the size , materials and door ,chimney mouth ,windows .
Technical Data
The main dimensions of each part (Unit: mm).
|
Name |
Size |
limit deviation |
|
Tent Length |
6000 |
+30 |
|
Tent Width |
5000 |
+30 |
|
Eaves Height |
1750 |
+20 |
|
Ridge Height |
3100 |
+20 |
|
Door Height |
1800 |
±20 |
|
Door Width |
800 |
±10 |
|
Door Curtain Height |
1930 |
±20 |
|
Door Curtain Width |
980 |
±20 |
|
Window Height |
600 |
±10 |
|
Window Width |
800 |
±10 |
|
Window Curtain Height |
710 |
±10 |
|
Window Curtain Width |
910 |
±20 |
Structure and main dimensions
Frame：Galvanized pipe diameter 32mm,wall thickness 1.0mm
Material specification
The specifications, quality requirements and uses of main and auxiliary materials
|
Materials |
Usage |
||
|
Name |
Specification |
Quality Standard |
|
|
Oxford cloth |
600D Polyester single side PVC coating |
sample standard |
Tent cover, packaging bag, accessory bag, etc. |
|
PE cloth |
160g/m2 |
Ground sheet |
|
|
Steel Pipe |
Q235 Φ32mm×10 mm |
sample standard |
Main frame pipe |
|
Q235 Φ38mm×1.0 mm |
Connector |
||
|
Nylon zippers |
8＃ |
Flat pull strength ≥ 600N The combined strength of the slider and the tab is ≥250 N |
Ten cover packing bag |
|
Velcro |
Width 40 mm |
Buckle strength ≥7.0N/cm2 Tear strength ≥ 1.3N/cm |
door and window, gable and Side wall fastening, etc. |
|
Steel wire |
Q 195～Q 235 φ4mm |
YB/T5294－2006 |
Three-way, four-way pull ring, frame pole fixing |
|
steel reinforced |
Φ4mm |
sample standard |
Frame fixing |
|
Rope |
Φ8mm |
Breaking strength≥3000N |
Tent fixing |
|
Cotton layer |
300g/m2 |
sample standard |
Insulation |
|
white Oxford cloth |
150D |
Surface materials |
|
|
Sewing Thread |
29.5tex ´3 14.8tex´3 |
GB/T 6836－2007 |
|
|
Heat Sealing Strip |
PU Sealing Strip Width 20 mm～25mm |
sample standard |
Waterproof |
|
Polyester webbing |
28´2/19mm´0.5 mm |
Breaking strength≥400N |
Frame Strapping |
|
28´4/22mm´1.0mm |
Breaking strength ≥800N |
Windows ,package bag |
|
|
28´4/28mm´2.0mm |
Braking strength ≥1800N |
Ground pole fixing belt, handle belt packing bag strap |
|
|
28´4/50mm´1.8mm |
Breaking strength≥2500N |
sewing triangle ring |
|
|
Anti-mosquito net |
55 dtex/24f |
Bursting strength ≥ 150 N and standard sample |
Windows |
|
Triangular ring |
Q 195～Q 235 φ4.0mm´50mm |
sample standard |
Tent fixing |
|
Activity three rings |
Q 195～Q 235 30mm×19mm |
sample standard |
Rod fixing straps, packing straps |
|
Angle steel |
Q 195～Q 235 30mm×30mm×3.0mm |
Ground nail |
|
|
Spring steel |
T8A,65Mn,t0.5 mm Width 8.5 mm |
sample standard |
Spring clip |
|
Package PE cloth |
Tensile strength ≥800 N/5cm Warp and weft density ≥ 40 pieces/10cm Mass per unit area ≥90 g/m2 |
Out layer packing |
|
|
Package Rope |
Φ2mm 2 shares |
Breaking strength ≥200N |
|
|
Package Rope |
Φ7mm 3 shares |
Breaking strength ≥1400N |
|
Tent Installation
1. Install the frame
2. Hang up the cover cloth on the frame
3. Stretch the tent fabric and fixed by ropes,ground nails
Use precautions
1. During use, you should pay attention to protection as much as possible. When putting up or taking down the tent, don't drag it on the ground. This helps prevent dirt, tears, and damage.
2. Keep the canopy clean, both inside and out. Always dust it off. Also, be careful not to bring soil inside when it rains.
3. After rain, snow, and strong winds, check for water, snow, and slack on the roof. Address these issues without delay to maintain the tents in good shape.
4. When someone removes the tent on a rainy day, they should hurry to dry it afterward. You cannot store the tent for a long time after it gets damp.
5. You must use all parts of the tent only for their intended purpose. You cannot use the skeleton components for squats or lifting bars.
6. After we erect the tent, we should properly store all the bags and sleeves and ensure we do not lose them for future use.
Packing and Delivery
Canvas bag with PE waterproof outside bag packaging.Support sea transportation, land transportation and air transportation.
Welcome to contact us, our email is jinsail@jinsail.com, we will reply to you as soon as possible.
Hot Tags: Customizable Disaster Relief Tent, China Customizable Disaster Relief Tent manufacturers, suppliers, factory, high performance metal frame tent, personalized metal frame tent, awnings for metal frame tent, camping furniture for metal frame tent, zippers for metal frame tent, army shelter tent
